Product ID:CURED PMR-15 PREPREG
MSDS Date:08/09/1993
FSC:8305
NIIN:00N052824
MSDS Number: BVMWF

ICI AMERICAS

501 WEST THIRD ST
WINONA, MN 55987-2854
US

Emergency Phone: 507-454-3611

Info Phone: 507-454-3611

Preparer: BRAD DIERINGER

Cage: IO862

ICI AMERICAS

WINONA, MN 55987 US

Telephone: 507-454-3611

Cage: IO862

CARBON; (CARBON/GRAPHITE FIBER)

CAS: 7440-44-0

RTECS: FF5250100

Fraction By Weight: 40-70%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 RDUST

CURED RESIN

CAS: 34406-24-1

Fraction By Weight: 30-60%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 1O MG/M3 (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CURED MATERIAL IS NOT OSHA HAZARDOUS
SUBSTANCE. DUST GENERATED FROM MACHINING OF CURED MATERIAL IS
EXPECTED TO BE REGULATED AS A NUISANCE DUST ONLY. INHALATION OF
THIS DUST MAY CAUSE RESPIRATORY IRRIT ATION. SKIN IRRITATION MAY
DEVELOP DUE TO FIBER FRAGMENTS GENERATED FROM MACHINING OF CURED
MATERIAL. (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:DUST MAY CAUSE MECHANICAL EYE
IRRITATION. NO FREE MDA IS EXPECTED TO BE PRESENT. MDA IS A
REACTIVE COMPONENT OF THIS SYSTEM & UPON CURING, MDA REACTS W/RESIN
TO BECOME PART OF NON-HAZARDOUS P OLYMER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . EYES:FLUSH W/WATER FOR AT LEAST
15 MINUTES, CONSULT MD. SKIN:REMOVE CONTAMINATED CLOTHING, WASH
BEFORE REUSE. WASH SKIN W/SOAP & WATER. REMOVE FIBER SPLINTERS
USING TWEEZERS OR A STERILE NEEDLE. INHAL:MOVE TO FRESH AIR.

Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:INCINERATION CAN GENERATE AIRBORNE CARBON
FIBERS WHICH MAY CAUSE ELECTRICAL MALFUNCTIONS.

Spill Release Procedures:PICK UP & USE UNCONTAMINATED MATERIAL.
CONTAMINATED MATERIAL SHOULD BE PICKED UP & DISPOSED OF PROPERLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE AT ROOM TEMPERATURE. PROTECT
ELECTRICAL EQUIPMENT FROM INFILTRATION OF HIGHLY CONDUCTIVE CARBON
FIBERS.
Other Precautions:I/A/W GOOD INDUSTRIAL PRACTICE, HANDLE W/CARE & AVOID
UNNECESSARY PERSONAL CONTACT.

Respiratory Protection:USE NIOSH/MSHA APPROVED DUST MASK RESPIRATOR IF
EXPOSURE LIMITS ARE EXCEEDED.
Ventilation:GOOD GENERAL VENTILATION & LOCAL EXHAUST RECOMMENDED,
PARTICULARLY WHERE GRINDING OR HEATING OPERATIONS OCCUR.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:CLEAN BODY-COVERING CLTHG. IT MAY BE HELPFUL
TO WEAR CLTHG W/TIGHT FITTING OPENINGS (I.E. NECK & SLEEVES) OR
(SUPP DATA)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EYE PROT:& FULL LENGTH FACE SHIELD . OTHER PROT EQUIP:TAPE CUFFS OF
SLEEVES TO PROTECTIVE GLOVES OR WRIST.

Spec Gravity:1.2-1.8
Appearance and Odor:BLACK SOLID MATERIAL.

Stability Indicator/Materials to Avoid:YES
NONE KNOWN.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CO*X, NO*X, AMINES, INCOMPLETELY
BURNED HYDROCARBONS.

Waste Disposal Methods:DISPOSE OF I/A/W LOCAL, STATE & FEDERAL
REGULATIONS, WHICH MAY VARY BY LOCATION. QUESTIONS CONCERNING
DISPOSAL SHOULD BE DIRECTED TO MFR'S SAFETY, HEALTH & ENVIRONMENTAL
AFFAIRS DEPARTMENT FOR EVALUAT ION ON A CASE BY CASE BASIS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.